Measurements
?

Choose Metric or Imperial to use your preferred measurements where unit conversion is supported. This changes the display preference, not the physical size of the film.

Automotive Window Tinting Laws in Australia

Choosing window tint involves more than selecting a shade. The finished windows must meet the requirements that apply to your vehicle, including light transmission, visibility and reflectivity.

This guide covers aftermarket tinting on ordinary light passenger vehicles, including cars and SUVs. Commercial vehicles, buses, heavy vehicles and vehicles with approved exemptions may have different requirements.

What does VLT mean?

Visible Light Transmission (VLT) is the percentage of visible light that passes through a window. A lower percentage means a darker window.

The legal limit applies to the glass and film combined, not just the film. A film labelled 35% can produce a finished window below 35% when applied to glass that is already tinted. Have the existing glass and completed installation checked with a suitable light meter.

The rear-window limits below refer to rear side windows and the rear windscreen behind the driver's seating position. For these darker rear-window allowances, the vehicle should have an external rear-view mirror on each side.

New South Wales

  • Front side windows: minimum 35% VLT.
  • Rear side windows and rear windscreen: minimum 20% VLT with external mirrors on both sides.
  • Front windscreen: only a permitted upper tint strip; no tint film across the main viewing area.

Transport for NSW vehicle inspection standards

Victoria

  • Front side windows: minimum 35% VLT.
  • Rear side windows and rear windscreen: minimum 20% VLT with external mirrors on both sides.
  • Front windscreen: film is restricted to the permitted upper strip and must not cover cameras or sensors.

Transport Victoria window tinting requirements

Queensland

  • Front side windows: minimum 35% VLT.
  • Rear side windows and rear windscreen: minimum 20% VLT with external mirrors on both sides.
  • Front windscreen: only a permitted upper tint strip. Queensland applies specific limits to the strip's depth and position.

Queensland vehicle standards: minor modifications

Western Australia

  • Front side windows: minimum 35% VLT.
  • Rear side windows and rear windscreen: minimum 20% VLT with external mirrors on both sides.
  • Front windscreen: tinting is restricted to the permitted upper strip.

WA vehicle accessories and window tinting information

South Australia

  • Front side windows: minimum 35% VLT.
  • Rear side windows and rear windscreen: minimum 20% VLT for passenger vehicles.
  • Front windscreen: no coating that reduces light transmission outside the permitted upper area. Cameras and sensors must remain unobstructed.

South Australian window tinting requirements

Tasmania

  • Front side windows: minimum 35% VLT.
  • Rear side windows and rear windscreen: minimum 20% VLT with external mirrors on both sides.
  • Front windscreen: no coating that reduces light transmission outside the permitted upper area.

Tasmanian car window tinting information

Australian Capital Territory

  • Front side windows: minimum 35% VLT.
  • Rear side windows and rear windscreen: minimum 20% VLT for ordinary passenger vehicles.
  • Front windscreen: tinting is restricted to the permitted upper strip.

Access Canberra window tinting requirements

Northern Territory

  • Front side windows: minimum 35% VLT.
  • Rear side windows and rear windscreen: minimum 15% VLT.
  • Front windscreen: tinting is restricted to the permitted upper strip.
  • Film condition: tint must be non-reflective and free from bubbles or distortion that affect visibility.

Northern Territory vehicle accessories and tinting requirements

Windscreen Tint Strips

The front side-window limits do not apply to the windscreen. A permitted tint strip is limited to the upper section. Its allowed depth depends on local rules concerning the top of the glass and the windscreen wiper sweep. These rules differ between jurisdictions, so do not assume the same strip size is legal everywhere.

Keep the driver's view, cameras and sensors unobstructed. Do not assume that a clear or high-VLT film is automatically permitted across the full windscreen.

Utes, Vans and Commercial Vehicles

Some jurisdictions allow darker rear glass on vehicles designed primarily to carry goods, subject to vehicle classification and mirror requirements. This is not a blanket exemption for every ute, dual cab, van or vehicle used for work.

Confirm the vehicle's classification and local requirements before applying tint below the passenger-vehicle limits. Heavy vehicles, buses and special-purpose vehicles require a separate assessment.

Factory Privacy Glass

Factory privacy glass may be darker than the limits for aftermarket tint. This does not automatically allow another layer of film. Adding film, including some clear films, can reduce light transmission further and make the window non-compliant.

In Victoria, additional film must not be applied to factory privacy glass that is already below the permitted VLT limit. Check the applicable rules before coating privacy glass elsewhere.

Before Choosing Your Tint

  • Measure the existing glass before selecting the film.
  • Check the finished glass-and-film VLT after installation.
  • Use film that meets local reflectivity requirements.
  • Keep required mirrors, lights, cameras and sensors unobstructed.
  • Check applicable requirements before travelling interstate.

Guide reviewed: 4 November 2026. This is general information, not an approval for a particular vehicle or installation. Requirements and exemptions can change. Confirm current requirements with the relevant transport authority before installation.